Services /

Here are the services we offer

DEFENDER INTERNATIONAL W L L

We, the management of Defender Aluminum & glass, is committed to provide its services to our customers with highest quality, on time execution and end to end maintenance back up of Building services with a focused to customers satisfaction.

Aluminum Composite Cladding

Aluminium plastic composite panel is compounded with top and bottom layers of aluminium sheet, Anti-toxic polyethylene core material. Both surfaces are rolled and coated with special baking varnish.Aluminium plastic composite panel is compounded with top and bottom layers of aluminium sheet, Anti-toxic polyethylene core material. Both surfaces are rolled and coated with special baking varnish.Aluminium plastic composite panel is compounded with top and bottom layers of aluminium sheet, Anti-toxic polyethylene core material. Both surfaces are rolled and coated with special baking varnish.

Glass Glazing

Generally, there are three common glazing configurations. They are Single, Double & Triple Glazing. As the names imply, Single Glazing includes one layer of glass, Double Glazing includes two layers and Triple Glazing includes three layers. Until the recent availability of various high performance materials, the greater the number of glass layers, the greater the insulating value of the window or door. Now, with the advent of such products as sealed insulating glass, Low E glass, Heat Mirror and others, insulating values can be enhanced without the use of multiple glass layers. Often, combinations of certain Glazing Options, Glass Types, Metalic Films and Chemical Gas Fillers can provide significant insulating efficiency.

Steel Fabrication

Due to its versatility, there are a wide range of stainless steel fabricating techniques. It may be helpful to review some of the processes involved in order to better understand the benefits and disadvantages of the different types of stainless steel fabrication. Although it has relatively high strength and work hardening rates, stainless steel is malleable enough to be bent, folded, machined, welded, deep drawn, or spun.We focus on three common stainless steel fabricating processes: work hardening, machining, and welding.

Annual Maintanence

In today’s competitive era, quality is a prime factor. Quality output from any anything depends on it's performance. To get better performance; maintenance is a key factor. Every organisation may not have specialized maintenance team to take care of their infrastructure.We have our 150 + highly qualified and motivated staff members are at your disposal.. In order to help our customers in getting the best throughput from our services, we have introduced the concept of Annual Maintenance Contracts .

Design and Engineering

Defender Aluminum & glass W.L.L has a dedicated team of experienced engineers and technicians capable of carrying out all types of projects by employing industry standards in Design,Engineering,Fabrication&Installation.


Our machineries are operated by thoroughly trained engineers and technicians who with their collective experience in the field of Unitized Curtain Wall Systems guarantee the customer a perfect product delivered and installed at all times.


Defenders objective is to combine the architects’ aesthetic ambitions with the provision of the required architecture, and at the same time meeting all the technical requirements. For every project, the designers illustrate their proficiency and undertake the responsibility to ensure that all materials they specify meet both the economic and technical requirements


The main requirements are:
• Risk Analysis
• Health & Safety
• Safe & Economic on Site Assembly and Installation.


Defender's objective is to provide every project the finest and most optimal Engineering Technology. Our design team is dedicated to create every assignment to the complete satisfaction of Engineers in Design, Safety and Durability


Project Management

By hiring experienced well-qualified project managers, by carefully following proven procedures and by giving detailed attention to control of all of the company’s operations, the success of the projects are assured.


The use of sophisticated, modern planning and management tools together with the required organization and resources gives Defender the full control of quality, cost and program to ensure the complete picture necessary for successful project management. This knowledge enables Defender to give a confident response to the individual needs of each project: quickly and accurately responding to changes wherever they occur.


Quality

The total quality approach is the most important factor in the company’s mission. Keeping up to changing market needs by eliminating compromises in process and product quality is the benchmarking factor in the success of the worldwide recognized building projects with the company.


Defender Aluminum & glass is committed to achieve a sustained, profitable growth by developing and delivering quality products in the field of architectural aluminium and glazing works that consistently satisfy the needs and expectations of our clients. We also ensure that our products are fully compliant to local and relevant International statutory and regulatory requirements.


We are committed to achieve the utmost customer satisfaction and to build a constructive relationship with our clients and suppliers and at the same time, enhance the competency of our employees through hard work and determination in an atmosphere conductive to providing the best results.


Installation

Defender Aluminum & Glass uses highly experienced and qualified installation and service crews together with carefully monitored quality control systems to ensure the highest level of quality, time and cost reliability. This attention to detail and focus on maximizing off-site fabrication by design has gained the company the reputation for successful installations.


Metal Cladding

Aluminium plastic composite panel is compounded with top and bottom layers of aluminium sheet, Anti-toxic polyethylene core material. Both surfaces are rolled and coated with special baking varnish.


Specifications

Aluminium Sheet: 0.50 X 0.50mm, 0.40 X 0.40mm, 0.30 X 0.30mm
Thickness : 0.21 X 0.21mm,0.81 X 0.18mm,0.15 X 0.15mm
Width : 1220mm,1575mm(Maximum)
Length : 2440mm,6000mm(Maximum)


Application Scope

1.Building Exterior Curtain walls
2. Decoration reformation Storey-addition for old buildings
3. Decoration of interior walls,cellings,bathrooms,kitchens and balconies
4. Shop’s door decorations
5. Advertisement boards, display platform and signboards
6. Wallboards and ceilings for tunnels
7. Industrial materials, Vehicle and boat materials


Steel Structure

Steel Structure is a combination of some steel elements like tubes & I beams. It is used to carry the unitized curtain wall, the elevation for canopies or any other feature in the building. It can be a fixed structure or movable joints, which control the movements of the structure itself. The finish of steel structure is hot deep galvanized & fire rated where required.


As a part of the quality procedures, we seek the steel structure works to be done right by means of implementing the suitable and approved series of regular checks and inspections. Therefore, we conclude the following welding tests:


1,FCAW-MIG
2,SMAW-CS
3,MAW-SS & TIG - Aluminium SS, MS


The mentioned tests shall be conducted for the verification of compliance with the approved procedures for steel structure with quality standards. Moreover; our company owns trained certified welders for keeping the true accuracy and standardized level of work.

SkyLight

Sky light is a different usage of the day natural light that provides effective internal lighting .It is an opening in the roof surface which can be made of stainless steel, Aluminium or glass with a transparent or translucent material. It usually consists of a steel structure with aluminium cladding or steel structure with spider glazing or may be as a combination of both.


Also, it gives an interesting feature in increasing building market values by giving aesthetic look to the building as an architectural feature, through specifying both of the lighting control and shading strategy. The shapes of sky lights can be used as a straight or curve-shaped as it is considered as a distinctive architectural advantage.


For safety purpose, we use the laminated glass in the fabrication process as it is assembly consisting of two plies of glass which are bonded together by an interlayer material. It is more durable, weather resistant and minimizes the risk of glass breakage, which assures the glass protection.


Skylight exterior Aluminum finish can be Kynar or powder coating as per the requirements of the architect and to match the specified finish. The exterior aluminium surface of the skylight finish, thickness and color are specified as per the requirement of the engineer.


In installation phase, the sky light system should be in accordance with the instructions and standard of our system. It is also remarkably necessary to attach to structure to permit sufficient adjustment to accommodate construction tolerances and other irregularities.


For the testing, the skylight undergoes to the required quality tests from approved independent testing laboratories for the purpose of attesting and certifying the full compliance with the specifications like air tightness, water tightness, and wind load resistance.


Canopies

Canopies create an esthetical difference in modern architecture as it is used at the entrance of the building or as a decorative feature in the roof. It usually consists of steel structure with aluminum cladding or steel structure with spider glazing or combination of both. The purpose of using stainless canopy systems is to avoid the natural effects of the rain and snow.


OThe exterior steel finish shall be galvanized or hot deep galvanized which provides additional protection and isolation from the corrosive attacks of chlorides and sulphides, which can be specified as per the requirement of the project.


The aluminium cladding used in fabricating the canopy shall be (4) mm thick specified as per the structural calculations.


Whenever have glass canopy, always use the laminated glass in fabricating the canopy as it minimizes the risk of injury from glass breakage. The laminated glass is strongly resist pent ration of any object through the canopy due to the combination of the tough an resilient PVB interlayer and glass combination.